# How to Use an App to Read Lines for Your Self-Tape (Setup and Settings)

> Your laptop reads the other part, your phone films you. Where to put each one so the reader sounds quieter than you, which line detection setting keeps the reader from jumping in, how to build your pauses into the scene, and why you hide the script before you roll.

- URL: https://www.offbook.com/blog/app-to-read-lines-for-a-self-tape
- Published: 2026-11-20
- Last updated: 2026-11-20

The sides came in at six. The tape is due tomorrow at noon, and the friend who usually reads for you is in a show. You have a phone, a tripod, and a laptop. The plan writes itself: let an app read the other character while you tape.

The plan is fine. The trouble is in the details nobody mentions. A laptop parked right next to the phone can sound louder than you on playback. A reader that jumps on your pause makes a good take look rushed. And a script glowing on a screen beside the lens is very easy to glance at.

The short version: check that the request allows a recorded or app reader, then use two devices. Your phone films; your laptop reads. Keep a tape mark beside the lens for your eyes, set the laptop a step or two farther from the phone's mic than you are, and turn it down until you're clearly louder. Tape with a line detection setting that waits for you, build any planned beats into the scene as pauses, and hide the whole script before you roll. Rehearse with the same reader until the timing is boring.

## Check the request, then split the jobs

Start with the casting email, because it overrules everything here. In the UK, the joint [Self-Tape Code of Practice](https://www.thecdg.co.uk/downloads/Self-Tape-Code-of-Practice.pdf) from the Casting Directors' Guild, Equity, and the personal managers' associations (CPMA and PMA) says a reader can be supplied virtually, through a pre-recorded app, or in person, and needn't be an actor. It also says a reader often helps but shouldn't be an absolute requirement, and that actors aren't expected to pay for one.

If your request asks for a live reader, find one; our guide to [finding a self-tape reader](https://www.offbook.com/blog/how-to-find-a-self-tape-reader) sorts the options by how much time you have. In the UK, the Self-Tape Code of Practice lists a pre-recorded app among the ways to supply a reader.

Then give each device one job. The phone, on a tripod at eye level, is the camera and the microphone. The laptop is the reader: it speaks the other character's lines and listens for yours. Keeping them separate means you start the camera once and never touch it again until the scene ends.

## Put the voice near your eyeline, not on it

The usual advice puts the reader right beside the lens, so your eyes land just off-camera. Bristol Old Vic Theatre School's [self-tape tips](https://oldvic.ac.uk/self-tape-audition-tips/) say to look just slightly off-camera, never down at the floor and never straight into the lens.

With a human reader, eyes and voice come from the same place. With a laptop, you can split them, and you should. Put a small piece of tape on the wall or a stand just to the left or right of the lens, at lens height. That's where you look. The laptop's job is only to sound like it's coming from roughly that direction.

So set the laptop on the same side as your mark, a step or two farther from the phone's mic than you are. Move it back, not sideways. You'll still hear the cue from the right side of the room. And the screen won't sit in your eyeline, tempting you to check it. Our guide to [self-tape eyeline](https://www.offbook.com/blog/self-tape-eyeline) covers which side to pick and how to keep it.

## Make the reader quieter than you

Casting notices this one. A reader who is louder than you pulls the scene away from you. Acting Magazine's piece on [the perfect self-tape reader](https://actingmagazine.com/2022/02/the-perfect-self-tape-audition-reader/) warns: *"I've seen casting directors skip a tape because the reader was too loud."*

The reason is distance. Bristol Old Vic tells you to keep the phone's mic as close to you as possible. But a laptop parked an inch from the phone is closer still, so on the recording its speakers can easily come out louder than you. The No Film School [self-tape guide](https://nofilmschool.com/self-tape-audition) gives the fix in one line: keep your reader farther from the microphone than you are.

Moving the laptop back does half the work. Its volume does the rest. Turn it down until the cue is clear but plainly quieter than your voice, then stop. Don't overcorrect: acting coach [Joseph Pearlman](https://josephpearlman.com/articles/2018/7/30/why-your-reader-can-make-or-break-your-self-tape-auditions) warns about readers who speak "slightly above a whisper," which leaves producers straining to hear the reader.

Listen to the reader's voice with the same ear. On tape it should be easy to follow without pulling focus. Record one exchange, play it back on headphones, and adjust. Our guide to [self-tape sound](https://www.offbook.com/blog/self-tape-sound-tips) has more on balancing the two voices.

## Choose how the reader knows you've finished

A recorded track plays on a clock. A reader app can do better. In Offbook, realistic voices read every other part; it listens through the microphone while you say your line, and plays the next cue when you finish. Line detection decides when it moves past your line. **Strict** wants you close to the script, Lenient has a 0-100 leniency slider, and Manual never advances on its own.

Video: [Line detection](https://www.offbook.com/learn/line-detection) (0:57)

For the take itself, use Lenient or Strict. Manual means you move on by pressing Enter or saying "next line," and the camera may catch either: a hand dropping out of frame, a key click, or two words that aren't in the script. Keep Manual for rehearsal, when you want to sit in a moment as long as you like.

Choose by what happens in rehearsal. If you're word-perfect, Strict keeps you honest. If the reader waits after you've clearly finished because you said a word differently, switch to Lenient and adjust the slider until it moves on when you're done. A short test scene will tell you in two runs.

Then check auto-advance on silence. It moves the scene on after 1 to 6 seconds of quiet, which rescues you when a line isn't matching. On tape, it can also cut into a pause you meant to take. Set it longer than your longest planned pause, and do your last rehearsal runs with the exact settings you'll tape with.

## Build your beats into the scene before you roll

A human reader learns your timing by the third run. With an app, you write the timing in. Pearlman tells actors to brief a reader explicitly, for instance when you want to be cut off at a certain point. The app version of that briefing happens in the scene editor.

- **Custom pauses.** Add a custom pause before one of the reader's lines where the other character should let your line land before answering.
- **Speed per line.** Slow one cue that feels rushed, or quicken one that drags, without changing the rest of the scene.
- **Stage directions.** Edit them, or delete the ones the reader doesn't need, so the scene holds only what you want on tape.
- **Dialogue and roles.** Edit the dialogue to match your sides, and reassign any line that landed with the wrong character.

Here's where that matters. Take this moment from Wilde:

> **LADY BRACKNELL.** ... I have always been of opinion that a man who desires to get married should know either everything or nothing. Which do you know?
>
> **JACK.** [After some hesitation.] I know nothing, Lady Bracknell.
>
> *Oscar Wilde, The Importance of Being Earnest, Act I ([Standard Ebooks](https://standardebooks.org/ebooks/oscar-wilde/the-importance-of-being-earnest))*

Say you're taping Lady Bracknell, and the app reads Jack. The stage direction puts the beat right where you'd want it, before his answer. Add a custom pause before Jack's line, and the reader hesitates for him while you hold her look. Then delete the bracketed direction in the scene editor, so the reader's line is just "I know nothing, Lady Bracknell."

Interruptions are the one rhythm to plan for. A reader that waits for you won't cut you off mid-word. When the sides have the other character break in, end your line where the script breaks it, and let the cue come straight after. For scenes where the other character does most of the talking, see our guide to [taping when the reader has the long speech](https://www.offbook.com/blog/how-to-self-tape-when-the-reader-has-the-long-speech).

## Hide the script before the take

Bristol Old Vic is blunt about paper: *"No script paper should be visible."* It also asks you to learn your lines dead letter perfect. A laptop beside the camera is script paper with a backlight, and your eyes know exactly where it is.

So treat the screen as off-limits once the camera is rolling. You can hide your own lines while everyone else's stay visible, or hide the entire script. For the taping runs, hide the entire script. There's nothing to read, and the only reason to look that way is gone.

The teleprompter mode, which shows your active line large and highlights each word as you say it, is a fine rehearsal tool for a scene you learned last night. It's the wrong tool for the take. Reading off a screen, even one right by the lens, shows on camera as eyes tracking text rather than eyes listening to someone.

## Rehearse with the reader you'll tape with

The best part of an app reader is that rehearsal and taping use the same scene, the same voice, and the same timing. Run it with your lines hidden until you no longer need them, then with the whole script hidden. Turn on scene looping and it starts again on its own when it ends. In Strict or Lenient, that means you can run it back to back without touching the keyboard.

Rehearse on your laptop with the full script on a big screen, and listen to your scenes on your phone anywhere. A couple of listens on the way home, with your own lines left as silent gaps, is a good way to hear the cues before you're in front of the camera. When it's time to shoot, the page on how to [self-tape without a reader](https://www.offbook.com/self-tape-without-reader) walks through the same laptop-and-phone setup.

Here is the run sheet for tonight:

1. Read the casting instructions and confirm an app reader is fine.
2. Upload the sides and pick your role. Realistic voices read every other part.
3. In the scene editor, fix any dialogue, delete stage directions the reader doesn't need, and add custom pauses where your beats need them.
4. Rehearse in Manual first to find your pauses, then switch to Lenient or Strict for the take.
5. Set auto-advance on silence longer than your longest pause, and do your last runs with these exact settings.
6. Tape a mark beside the lens. Put the laptop on that side, a step or two farther from the phone's mic than you are.
7. Record one exchange, play it back on headphones, and lower the laptop volume until you're clearly louder.
8. Hide the entire script. Roll the phone, slate if asked, and start the scene.

Do a few takes and send the best one. If the reader has given you the same steady read every time, the only thing changing between takes is you, which makes them easy to compare.

## Questions actors ask

### What is the best app to read lines for a self-tape?

Look for one that listens and waits for you to finish rather than playing a fixed track, with control over pauses and speed. Offbook does both: realistic voices read every other character, it cues the next line when you finish yours, and the scene editor lets you add custom pauses and set the speed of any line. Your phone or camera films the take.

### Can I use my phone as both the camera and the reader?

It's easier with two devices. Use the phone as the camera and a laptop as the reader, so neither has to share the mic or the screen. Rehearsing out loud with cues runs on a laptop or desktop browser; on a phone you can listen to your scenes, with your own lines spoken, skipped, or left as silent gaps.

### Will casting mind that the reader is an app?

Follow the request. In the UK, the Self-Tape Code of Practice lists a pre-recorded app among the ways to supply a reader. A reader that's too loud gets noticed, so the setup matters.

### How loud should the app reader be on my self-tape?

Clear but plainly quieter than you. Keep the phone close to you and the laptop farther from the phone's mic than you are, then lower the volume until you're the voice casting hears first. Check with a short test take on headphones before the real one.
