# How to self tape without a reader > How to self tape without a reader: upload your sides, and Offbook's AI voices read every other role on cue while you record on your own camera. Try 7 days free. - URL: https://www.offbook.com/self-tape-without-reader No reader tonight? Open Offbook on your laptop next to your camera. It reads every other role out loud and waits for you to finish each line, while you record with your usual setup. ## Self taping without a reader: the short answer To tape a scene alone, you need something that says the other lines at the right moment. Actors have tried a lot of fixes: recording the lines on a voice memo and leaving gaps, pasting the scene into a text-to-speech app, or calling a friend at 11 p.m. Each one works until the timing goes wrong. Offbook solves the timing. Upload your sides, choose your role, and AI voices read every other character. Offbook listens through your computer's microphone, so the next cue plays when you finish your line, not after a fixed gap. Take your time and it waits. Pick up the pace and it keeps up. You keep your own camera setup and film in the quality you choose. Offbook is the reader standing beside the lens, available whenever your tape is due. ## Step by step: self tape with an AI reader From sides in your inbox to a finished take 1. **Upload your sides.** Add the PDF, photos of the pages, or pasted text. If you got a full script, delete everything above and below your scene to trim it to your sides. 2. **Pick your role and a reader voice.** Choose who you play. Each other character gets an AI voice. Preview them and pick one that is clear and easy to listen to. 3. **Rehearse until it is yours.** Run the scene with your lines hidden until you no longer need the page. Rehearsal and taping use the same scene. 4. **Hit record, then Spacebar.** Start your camera, step onto your mark, and start the scene. Offbook reads each cue and waits for you to finish your line. ## Setting up a solo self tape with Offbook A few settings make the difference between a reader that helps the tape and one that gets in the way. ### Put the laptop where a reader would stand Just off to the side of the lens. Your eyeline goes there, not to the screen. A small piece of tape next to the lens gives you a mark to play to. ### Keep the reader quieter than you Your camera records the laptop speakers too. Casting should hear the cue, but your voice should be clearly louder. Record a test and play it back. ### Hide the stage directions Keep stage directions on Hidden so a narrator does not read them on tape. Use Silent with pause if you need time to play an action. ### Put the beats where you want them Add a pause of 0.5 to 5 seconds before a cue so the reader does not jump on your moment. You can also set any line's speed from 0.5× to 2×. ### Have a backup for missed lines If a short line is not picked up, auto-advance moves the scene on after 1 to 6 seconds of silence. Set it longer than your longest planned pause. ### Get the read you need If a cue sounds wrong, regenerate it or try another voice. For one line that must land a certain way, use Voice Clone to record it yourself. ## Self tape tips when you are your own crew - **Read the instructions first.** Framing, slate, file naming, and reader requirements differ from one breakdown to the next. Follow them exactly. - **Frame at eye level.** Put the camera at the height of your eyes, usually in a medium close-up, against a plain background. - **Light your face from the front.** A window or a soft light in front of you beats an overhead bulb. - **Find a quiet room.** Turn off fans and close the windows. Room noise hurts the tape and can confuse the line detection too. - **Rehearse before you roll.** Get off book first so the takes are about choices, not words. Then do a few takes and send the best one. For more on gear and setup, read our guide on [how to self tape alone](https://www.offbook.com/blog/how-to-self-tape-alone). ## Why use an AI reader for self tapes? **It is there when the tape is due.** Sides often arrive the night before. You do not have to find someone who is free, awake, and willing. **Take ten is the same as take one.** The reader gives the same read every time, so the only thing changing between takes is you. **Rehearsal and taping happen in one place.** The scene you used to learn the lines is the scene that reads with you on camera. ## Your setup: laptop as reader, phone as camera - Put your laptop just beside the lens. Offbook reads the other lines from there, so your eyeline lands where a reader would stand. - Record on your phone or camera as you always do, then trim and send the take from the app you already use. - Offbook gives the same steady read on take ten as on take one, so you can compare takes and keep your best. - If a breakdown asks for a live reader, use one. For every other tape, Offbook is ready whenever you are. ## What actors say > “Got sides last minute while I was traveling. I didn't have anyone to run with, so I rehearsed on the app in my hotel room. By the end, I felt ready to tape.” > — Caleb N., Actor in-training, HB Studios > “My new line-learning process is simple, get my sides, pop them into Offbook, drill. No more bugging my friends to read for me.” > — Marcus J., Film & TV Actor, Los Angeles > “I like that Offbook never gets frustrated when I need to repeat sections over and over. I can actually focus on my delivery.” > — Rowan K., Film & TV Actor, Chicago ## Self taping without a reader: FAQ ### Can I self tape without a reader? Yes. You need something that delivers the other lines on cue. Offbook does that with AI voices: upload your sides, pick your role, and it reads every other character out loud and waits for you to finish each line while you record. ### Does Offbook record my self tape? No. Offbook is your reader. You record with your usual setup, such as a phone or camera on a tripod, while Offbook runs on a laptop or desktop next to it. ### Will casting hear the AI reader? Yes. Your camera picks up the reader from the laptop speakers, the same as a human reader off camera. Keep the volume lower than your own voice and check a test recording before you start your takes. ### Where should I look if there is no reader in the room? Just to the side of the lens, where a reader would stand, unless the casting instructions say otherwise. Put a small mark there and play the scene to it, not to the laptop screen. ### Can I control the timing of the reader's lines? Yes. Offbook waits for you to finish each line. You can also add a pause before any cue, change the speed of any line, and choose how stage directions are handled. ### What do I need to self tape with Offbook? A laptop or desktop with a microphone and a browser (we recommend Chrome) for the reader, the camera or phone you already film with, and a plan or 7-day free trial. Out-loud rehearsal runs on the computer, and on your phone you can listen to the scene before you tape. ## Related - [How to self tape alone](https://www.offbook.com/blog/how-to-self-tape-alone) - [Best self-tape apps and readers](https://www.offbook.com/blog/best-self-tape-apps) - [AI scene partner](https://www.offbook.com/scene-partner-ai) - [AI line learner](https://www.offbook.com/ai-line-learner) - [Cold read app](https://www.offbook.com/cold-read-app) - [Practice lines without a scene partner](https://www.offbook.com/blog/practice-lines-without-scene-partner) - [Pricing](https://www.offbook.com/pricing)