How to Edit a Self-Tape: Trim, Add the Slate, Join Scenes, and Export
Editing a self-tape is mostly trimming: cut the fumble at the start and the reach for the phone at the end, put the slate where the brief asks, join scenes only if they want one file, and export a file the upload site accepts. Here is how to do each step with the editor already on your phone or computer.
The Offbook team
Nov 19, 2026 · 9 min read
You got the take. It’s the one where the pause landed and the reader didn’t rush you. But the file starts with four seconds of you walking back from the phone, and it ends with your hand filling the frame as you reach to stop it. The slate is in a separate clip. The second scene is in a third.
Now you have to edit it, and the deadline is tonight. The good news is that a self-tape edit is small. Casting doesn’t want a short film. They want your performance, with nothing in the way.
Here’s the short version. Trim the dead air at the head and tail of each take, and never cut inside one. Put the slate where the brief asks: at the top, in its own file, or not at all if they don’t want one. Join scenes only if they ask for a single video. Check that your voice and the reader’s are both clear. Export a file the upload site will take, then watch the exported file all the way through before you send it.
How much editing is a self-tape allowed?
Less than you’d think, and that’s a relief. When the 2023 SAG-AFTRA tentative TV and theatrical deal was reached, Deadline reported that no editing or specific equipment would be required for self-tapes, alongside a recording standard of no higher than 720p. Check the union’s current terms if you work under its contracts, but the direction is clear: you don’t need to edit much.
So think of editing as housekeeping. You’re taking out the parts that aren’t the audition (walking into frame, the reach for the phone) and putting the pieces in the order casting asked for. Everything else stays as it was filmed.
In our view, that rules out a few things actors are tempted to add:
- No music under the scene or the slate, unless the brief asks for it.
- No color filters, beauty filters, or effects. Casting wants to see what you look like on an ordinary camera.
- No transitions between scenes. A straight cut is cleaner than a fade or a wipe.
- No title cards with your headshot or credits, unless they ask. Casting usually already has those.
- No cuts inside a take. If you stumbled halfway through, do the take again rather than splicing two halves together.
That last one matters most. A cut inside a scene shows: your position jumps, the light shifts, the reader’s line clips. It tells casting the take didn’t hold up on its own, which is the one thing you don’t want them thinking.
Trim the head and tail of every take
This is most of the job. Leave a beat of stillness before your first line, so the take doesn’t start mid-breath, and a beat after the last line, so the moment can land before the screen goes black. Then cut everything outside those beats: the walk into frame, the “okay, going”, the reach to stop recording.
Before you trim, keep a copy of the original. If you cut too tight, you’ll want the untouched take to go back to. Here’s how to do it with the editor you already have.
On an iPhone
In the Photos app, open the video and tap Edit. Apple’s iPhone User Guide says to drag either end of the frame viewer below the video to set the start and stop points, then tap Done. You then choose Save Video, which keeps only the trimmed version, or Save Video as New Clip, which keeps both.
Save Video as New Clip is the safer choice for a tape, because the original stays in your library. Apple notes that a video saved as a new clip can’t itself be reverted to the original. If you used Save Video instead, you can undo the trim later by opening the video, tapping Edit, and tapping Revert.
On an Android phone
In Google Photos, open the video. The Google Photos Help page says to touch and hold, then drag the trim handles to select the part of the video you want to keep, and tap Save at the top to save a copy with your edits. Play the copy back before you delete anything.
On a Mac
Spotlight’s guide to editing and sharing self-tapes calls QuickTime Player the easiest software to use for this. Open the take and choose Edit > Trim. A yellow frame appears under the video. Drag the markers at each end to where you want the take to start and stop, then click Trim. Spotlight adds that Mac users may prefer iMovie, which comes pre-installed on Apple computers.
On a Windows PC
Spotlight notes that QuickTime has started charging PC users and points them to DaVinci Resolve instead. On Windows, you can also use Clipchamp, Microsoft’s video editor. Its support page says to click the clip on the timeline, move the seeker to where you want to cut, and click the scissors icon or press S to split it. Then click the piece you don’t want and press delete or backspace.
Put the slate where the brief asks
Read the instructions before you touch the slate. Some casting offices want the slate at the top of the first scene. Some want it as its own file. Some don’t want one at all. Our guide on how to slate for a self-tape covers what to say and when to leave it out.
If they want a separate slate, you’re done: trim it like any other take and name it as the slate. If they want it at the top of the scene, you have two choices. Film it as part of the same take, which needs no joining. Or film it separately and join it to the front of the scene, as in the next section.
Filming the slate straight into the scene saves a step, but it means a fumbled slate costs you the whole take. You can film the slate on its own for that reason, then join it on. A long pause between “...and I’ll be reading for Nora” and the first line looks like a mistake, so if you film the slate into the scene, keep that pause short as you film. If you film it separately, trim it tight before you join it on.
Join scenes only when they want one file
Spotlight’s view is that it’s fine to send different files for each scene as long as they’re labelled accordingly, and it suggests filming each scene as a separate video file in the first place. That gives you the most freedom: you can pick the best take of each scene on its own, and a bad take of scene two never costs you scene one.
Join them only if the brief asks for a single video, or the upload site takes only one file. Here’s how:
- On a Mac, open the first clip in QuickTime Player. Spotlight’s steps: choose Edit > Insert clip after selection, pick the second clip, click Choose media, repeat for any more clips, and click Done.
- On Windows in Clipchamp, Microsoft’s guide to combining videos says to drag the clips onto the timeline side by side, then remove any gaps between them.
- On a phone, your gallery app may not join clips. If it can’t, move the files to a computer and join them there, rather than downloading an editor you’ve never used the night of the deadline.
Put them in the order casting listed: slate, then scene one, then scene two. Use a straight cut between them. And watch each join, because a few seconds of black or a doubled frame at the seam is easy to miss in the timeline.
Check the sound before you export
Sound problems are hard to fix in an edit, so the best fix is upstream. If the reader drowns you out, the next tape should move them further from the mic, not you closer to it. Our guide to self-tape sound tips covers that setup.
For the tape you have, listen to it once with headphones. Can you hear every word of yours? Can you hear the reader’s lines well enough to follow the scene? If one take has a car horn or a dog under your best moment, use the other take rather than trying to clean it.
Newer iPhones have one tool that can help. Apple says Audio Mix works on videos recorded with Spatial Audio on iPhone 16 or later, and its Studio setting reduces background sounds and reverb. Try it on a copy and listen closely before you keep it.
Export a file the upload site will take
Spotlight says that if you filmed on your phone, the file will already be in the correct format, and that 720p is more than sufficient for self-tapes. In QuickTime, its steps are File > Export As > 720p. Spotlight notes that the resolution you choose also affects the file size.
Upload sites set their own limits. The Eco Cast help pages say each video clip can be no larger than 100 MB, and warn that once a video has been submitted, there’s no opportunity to make changes. So check the size against the limit before you upload, not after.
Our guide to naming and sending a self-tape has the export settings, the size limits on other sites, and how to name each file so it doesn’t get lost.
Rehearse so the edit stays small
The fastest edit is the one where every take runs clean from first line to last. That comes from knowing the scene before you film: your lines, the reader’s cues, and where the pauses fall. When you’re shaky on a line, you get stops mid-take, and then you’re tempted to cut two halves together.
Offbook helps you get there. Upload your sides as a PDF, a photo, or text, pick your role, and realistic voices read every other character. Offbook listens through the microphone while you say your line and plays the next cue when you finish. Hide your lines once the scene is close, so you’re working from memory before the camera ever comes out. Our free run lines online tool lets you try it on a classic scene first.
Rehearse on your laptop with the full script on a big screen, and listen to your scenes on your phone anywhere. Then film. If you get one clean take of each scene, the edit is two trims and an export.
A ten-minute edit, start to finish
- Read the brief again for the slate, the number of files, the file type, and the size limit.
- Keep the originals untouched: copy the takes first, or use Save Video as New Clip on an iPhone.
- Trim the head and tail of each one, leaving a beat before the first line and after the last.
- Put the slate where the brief asks: at the top, in its own file, or not at all if they don’t want one.
- Join the files only if they asked for one video, in the order they listed.
- Listen with headphones for your voice, the reader’s lines, and any noise.
- Export at 720p unless the brief says otherwise, and check the file size.
- Watch the exported file from start to finish, then name it and send it.
If you’re deciding between two takes, our guide to how many takes to send helps you choose before you start editing.
Questions actors ask
How do you edit a self-tape on your phone?
Use the editor that’s already there. On an iPhone, open the video in Photos, tap Edit, drag the ends of the frame viewer, and tap Done, then choose Save Video as New Clip to keep the original. On Android, open it in Google Photos, drag the trim handles, and tap Save to save an edited copy.
Should the slate and the scenes be one video?
Only if the brief asks for one. Spotlight says it’s fine to send a separate file for each scene as long as each is labelled. If the instructions want the slate at the top, either film it into the scene or join it to the front with a straight cut.
Can I cut between two takes to make one good one?
It’s better not to. A cut inside a scene usually shows, through a jump in your position or a clipped line from the reader. Film the scene again until one take holds up on its own, and send that.
Should I add music or a title card?
No, unless the brief asks for one. Casting is watching for your performance, and anything added on top gets in the way. Keep the edit to trimming, the slate, and joins.
Free tool · No account needed
Try it: run a scene right here
Pick a classic scene and a part. The voices read the other lines, and the scene waits for yours. No account needed.
Do this with your own script
Upload a PDF or a photo of your script, and AI voices read every other part and wait for your line.
Keep reading
- How to Self-Tape a Scene When the Reader Has the Long SpeechThe sides give the other character a minute of talking and you three short lines. What to do with your face while the reader goes on, where to look, how to brief the reader on pace, and whether you’re allowed to trim the speech.
- Slatable vs SelftapePal: Which Makes Your First Self-Tape Easier?Slatable is an iPhone and iPad app that films, slates, and exports your tape; SelftapePal is a laptop reader that plays lines you or a friend recorded while your phone films. We compared both, plus Offbook and WeAudition, step by step from their own pages. Our pick is Offbook.
- How to Slate for a Self-Tape: Examples for Every Kind of RequestWhether to slate at all, what a slate can include, and word-for-word examples for every kind of request: name and agency, height and location, full body and profiles, hands, musical theater, and UK idents. Plus file naming and what to do when you fumble it.
- How to Get on IMDb as an ActorIn practice, an IMDb page follows a credit on a listed title. What IMDb’s own help pages say about which work counts, how to add yourself, the proof editors ask for, what IMDbPro does and doesn’t do, and how casting actually uses the page.