Self-Tape Eyeline: Where to Look When You Tape an Audition
Not into the lens, not at the floor, and not at a reader across the room. Where your eyes go on a self-tape: just beside the lens at lens height, which side of the camera your reader takes, the few times you look straight down the barrel, and how to mark the wall when you tape alone.
The Offbook team
Nov 3, 2026 · 10 min read
You watch the take back and something is off. The performance felt connected in the room, but on the screen you’re half in profile, or staring at the viewer like a news anchor, or your eyes keep sliding down to the sides on the table. Nothing about the acting changed. Your eyes were just in the wrong place for a camera.
Eyeline is one of the easier parts of a self-tape to fix and one of the easiest to get wrong, because you can’t see it while you work. You only see it on playback, and by then you’ve shot five takes.
The short version: look at your reader’s eyes, placed just beside the lens and at the same height as it, on one side, for the whole scene. Look into the lens only for the slate or when the request or the script asks for it. Alone, put a small mark on the wall in the reader’s spot. This guide does that one job; for the full process from sides to send, see how to self-tape an audition.
The default: just beside the lens, at lens height
Casting watches a self-tape the way an audience watches a close-up. They want your eyes, both of them, and they want to feel you’re talking to someone just out of frame. Spotlight’s self-tape guide gives the reason plainly: your eyeline should be close to the camera because they want to see both sides of your face.
How close? Acting Magazine’s answer to whether you look at the camera during a self-tape suggests keeping your eyeline within 5 to 10 degrees of the lens, with the reader standing or sitting just to the side of the camera. Interlochen Online’s guide to audition tapes, by instructor Ria Pavia, adds the height: your eyeline should be on the same level as the camera, with the reader behind it or barely off to one side.
Drama schools say the same thing to applicants. RADA’s self-tape guidance suggests looking slightly to the side, at the edge of your phone (the edge, not your own face on the screen), as though you’re speaking to another character. Iman Bahmanabadi, Head of Screen Acting at Bristol Old Vic Theatre School, puts it in three lines in the school’s self-tape tips: don’t look down at the floor, don’t look into the camera, look just slightly off-camera.
Close is the target; the triangle is the wall
Toronto acting coach John Boylan, in his note on eyelines in auditions, suggests working in a triangle of about thirty degrees on either side of the lens, so the viewer can always see both of your eyes. Treat that as the edge, not the target. Start as tight to the lens as you can without looking into it, and use the extra room only when a scene needs it, such as a second character or a big physical moment.
A quick way to feel the difference: shoot ten seconds with your eyeline an inch off the lens, then ten seconds with it a foot off. On playback, the first looks like you’re talking to someone at the table. The second looks like you’re talking to someone at the next table.
Look at your reader’s eyes, and put them at lens height
The reader is your eyeline, so where they stand is where you look. Actors Access, in its help article on tips for shooting self-tape auditions, asks you to make eye contact with the reader, not the lens, unless casting requests otherwise, and to have the reader stand behind the camera or directly next to it. It also says never to show the reader on camera unless the casting director asks.
Getting the reader beside the lens is half the job. Their eyes also need to be at your eye height. The Playground’s guide to self-tape setup is written for parents who read for their kids, and the advice holds for any reader. Its rule for the reader is blunt: “Not above. Not below. Eye level.” A reader standing while you sit makes you look up, which reads small. A reader sitting on the bed while you stand makes you look down, which reads dominant.
That matters because eye level changes the story. New York audition coach Kyle Branzel, in his video notes on working with a reader, says eye level suggests equality, looking down can suggest status or authority, and looking up can show vulnerability or deference. If you didn’t choose that, don’t let the furniture choose it for you. Ask your reader to stand if you stand, or bring a chair to match.
Two small fixes help a reader stay put. Give them a spot to stand on, marked with tape on the floor, so they don’t drift away from the lens as the scene heats up. And ask them to keep the sides at chin height, not at their waist, so their eyes stay up where yours need to go. For more on the reader’s side of the job, see how to be a good self-tape reader.
Pick a side of the camera and keep it
Which side should your reader take, left or right? None of the guides above prefers a side. Whichever you pick, keep it for the scene. An eyeline that hops from one side of the lens to the other in a two-person scene reads as two different people.
So choose for practical reasons. Put the reader on the side with room for them to stand clear of the frame. If your light comes from one side, one practical choice is to put the reader on that side, so turning to the reader turns your face into the light. And if the sides suggest geography (she’s at the door, he’s at the window), it doesn’t have to match. Nobody watching the tape can see the room; they see your eyes.
Be ready to flip. Boylan points out that you may prepare at home with the reader on the left, then find the reader on the right in the room or on a callback. Run the scene both ways once before the day, so the side is a choice and not a habit you can’t change.
If another character speaks, Boylan’s note says secondary characters can go on the other side of the camera, while the main character stays on the reader. Keep that second spot a few inches off the lens, not across the room. For three or more people, see how to self-tape a scene with several other characters.
When to look straight into the lens
Looking into the lens is the exception, and the exceptions are short. Pavia’s rule covers most tapes: “Aside from when you slate, never look directly into the camera.” Boylan’s word for it is spiking the camera, and his note says you don’t want to.
Here’s when the lens is right:
- The slate. Name, height, location, whatever the request asks for, said to the lens as yourself. Our guide on how to slate for a self-tape has the word-for-word versions.
- Casting asks for it. Acting Magazine notes that casting directors occasionally ask for a direct-to-camera performance, and then you look into the camera. The Playground’s guide adds certain commercial auditions to the list.
- The script talks to the audience. In Acting Magazine’s guide to where you look when self-taping, Carmichael Phillip keeps the lens for rare cases where the script calls for direct address to the audience.
Everywhere else, the lens is the viewer, and talking straight to the viewer breaks the scene. The Playground’s guide says it plainly: for everything else, it looks like the actor is staring at the viewer. If a scene moves between talking to a character and talking to the audience, decide which lines go to the lens before you roll, and keep the rest on your reader.
No reader? Mark the wall and give the mark a voice
A reader helps, but you don’t always have one. The UK casting bodies agree on that. The Self-Tape Code of Practice agreed by the Casting Directors’ Guild, Equity, and the agents’ associations says a reader is often beneficial but should not be an absolute requirement. It adds that a reader can be virtual, via a pre-recorded app, or in person, and does not need to be an actor.
Without a person, you build the eyeline yourself. Acting Magazine suggests picking an imaginary point to the side of the camera and focusing your eyeline there. Make it real: a small piece of tape or a sticky note right beside the lens, at your eye height, on the side you chose. Then put whatever plays the other lines (a phone, a speaker, a laptop) directly under or behind the mark, so the voice comes from where you’re looking.
A dot on the wall is easy to stare at and hard to talk to. Give it a face. Picture the other character standing there, at your height, and place their eyes on the mark. Our guide to self-taping alone covers the reader, sound, and run order when nobody else is in the room.
Five eyeline mistakes that show up on playback
- Watching yourself on the screen. Shooting on the selfie camera with the screen facing you pulls your eyes to your own face, a few inches from the lens but not on your reader. Set up the frame first, then stop checking it.
- A reader who sits while you stand. Your whole tape becomes a look down. Match heights, or move the camera and the reader together.
- A reader too far from the lens. Acting Magazine’s guide says to keep the reader close to the camera so your eyeline doesn’t drift too far off center. Every foot of distance turns you further into profile.
- Eyes dropping to the sides. Each glance down at the page shows casting your eyelids. If you need the page, hold it near your eyeline, not on a table at your waist.
- Darting eyes. Phillip warns against darting your eyes too much, because it distracts, and suggests letting your eyes move naturally. Nerves make eyes busy. A clear target calms them.
Your eyes can leave the reader, and come back
An eyeline isn’t a stare. People look away when they think, remember, or don’t want to be seen, and a scene where your eyes never leave the reader can look frozen. The rule isn’t “never look away.” It’s “know where your eyes live, and go home.”
Keep the looks away small and motivated. A glance to the side as you search for the word, a drop when the other character says something you can’t face, then back to the reader on the next thought. A glance that passes through the floor isn’t the same as resting there. If you find your eyes going down on every line, that’s usually the lines, not the acting. Our guide to acting with your eyes on camera has drills for this.
A monologue on tape
With no reader in the scene, the listener is imaginary, and the same geometry applies. Phillip’s guide says to look just to the side of the lens, about an inch or two away. Where to place that listener, and how to move your focus with the thoughts, is covered in where to look when you perform a monologue.
Learn the lines so your eyes can stay up
Many eyeline problems start as line problems. When you’re not sure what comes next, your eyes go looking for it: down to the page, up to the ceiling, off to the side. The more securely you know the sides, the more of the tape is your eyes on your reader.
Offbook helps with that part before you set up the camera. Upload your sides and pick your role, and realistic voices read every other character; Offbook listens through your microphone and plays the next cue when you finish your line. Hide your lines while everyone else’s stay visible, then hide the whole script for a final run. If you want to start with the words alone, our free line memorizer turns your lines into first-letter cues.
A one-minute eyeline check before you roll
- Set the camera at your eye level, in the position you’ll perform in. If it isn’t there yet, see self-tape camera height and orientation.
- Choose a side. Put your reader’s eyes, or a tape mark, right beside the lens at that height.
- Record twenty seconds: a line to the reader, a line straight to the lens, a line to the reader again.
- Watch it back. In the lens line, are you looking straight at the viewer, not up or down? In the reader lines, can you see both of your eyes clearly?
- If you see one eye and an ear, move the reader closer to the lens. If you’re looking down, raise the reader or lower yourself.
- Shoot the scene, and keep the reader on the same mark for every take.
Questions actors ask
Should I look into the camera on a self-tape?
Not in the scene, unless the request or the script asks for it. Look into the lens for the slate, for a direct-to-camera request (some commercial auditions ask for one), and for lines the script addresses to the audience. Otherwise, look at your reader just beside the lens.
Which side of the camera should my reader stand on?
Either side works; what matters is that you pick one and keep it for the whole scene. Choose the side with room for the reader to stand clear of the frame, at your eye height and as close to the lens as they can be without blocking it.
Where do I look if I have no reader?
At a small mark on the wall or a stand right beside the lens, at your eye height. Put the phone or speaker playing the other lines under the mark so the voice comes from where you’re looking, and picture the other character’s eyes on it.
What if my character looks down at someone, like a person in a bed?
Cheat the look up toward the lens. A low eyeline shows casting your eyelids. Keep the reader beside the camera at lens height, and let a small tilt of your head carry the “down.”
Is eyeline different on a live Zoom audition?
The goal is the same, but the reader is usually a face in a window, not a person beside the lens. Our guide to live Zoom auditions covers where to put that window and where to look.
Free tool · No account needed
Try it: run a scene right here
Pick a classic scene and a part. The voices read the other lines, and the scene waits for yours. No account needed.
Do this with your own script
Upload a PDF or a photo of your script, and AI voices read every other part and wait for your line.
Keep reading
- Self-Tape Camera Height and Orientation: Getting the Phone in the Right PlaceWhy a phone propped on the desk makes casting look up your nose, how to get the lens to your eye level with books or a cheap tripod, why the phone goes sideways unless the request says otherwise, where your eyeline sits next to the lens, and a two-minute test take that checks all of it.
- How to Self-Tape a Monologue: Eyeline, Framing, Slates, and TakesWhere to look when there is no reader, how to frame a monologue, when and how to slate, how many takes to shoot, and how drama-school tapes differ from tapes for agents and casting.
- How to Audition for a Host or Presenter Role (Prompter, Ad-Libs, and Your Reel)In a hosting audition there’s no character to hide behind: you play yourself, straight down the lens. What these auditions usually ask for, how to read a prompter so it sounds like talking, how much you can ad-lib, and what a short hosting reel should show, from presenter trainers, a hosting agent, and on-camera coaches.
- Where to Look When You Perform a Monologue (in the Room, on Stage, and on Tape)Not at the panel, not at the floor, and not at one frozen spot for two minutes. How to decide who your speech is spoken to, place that listener in the room, move your focus with the thoughts, and adjust it for a stage, an audition panel, or a self-tape.