Should You Read the Stage Directions When You Run Lines? What to Say, Skip, and Mark
Mostly no: say the dialogue, not the italics. But don’t just skip them. Sort every direction into one of four piles (skip it, do it, hold it, or treat it as a cue), rehearse your own business as actions, keep the pauses as real time, brief your partner in one minute, and leave the directions out of your self-tape unless casting asks.
The Offbook team
Nov 19, 2026 · 10 min read
Your roommate agreed to run lines with you. Bless them. They pick up the script, clear their throat, and read: “Maria crosses to the window. A long pause. She doesn’t turn around. Beat. Are you leaving?” Now you’re laughing, the moment is gone, and you’re not sure whether you were supposed to wait through the long pause or come in right away.
Every script is two texts layered on top of each other: the words people say, and the italic or bracketed words around them that describe what happens. When you’re learning lines, the second text causes a surprising amount of trouble. Read it all aloud and the scene crawls. Skip it all and you lose the timing, the business, and sometimes the cue for your next line.
The short version: don’t say the stage directions out loud while you run lines, and don’t ignore them either. Sort each one into one of four piles. Skip the ones that only describe. Do the ones that are your physical business. Hold the pauses as real silence. And treat any direction that triggers your next line as a cue, which your partner signals with a word or a gesture. If you want the vocabulary first (upstage, downstage, crosses), our guide to stage directions explained covers it.
Why reading them aloud gets in the way
When you run lines, you’re training a chain: their line ends, your line starts. Anything spoken in between becomes part of that chain. If your partner always says “she crosses to the window” before your cue, your brain starts to wait for those words, and on the night nobody says them.
It also changes the rhythm you rehearse. Reading a direction rarely takes as long as doing it. “He picks up the letter, reads it, folds it carefully, and puts it in his pocket” is about three seconds of reading aloud, but the business itself might take five, or one. Either way, the gap you practice is the wrong length.
And there’s a quieter problem. A direction read in a narrator’s voice tells you how the scene should feel, before you’ve had a chance to find out. Acting Magazine’s piece on reading stage directions in a self-tape says casting directors “expect you to show, not tell,” and that narrating directions pulls the viewer out of the scene. The same is true in your living room. You want to show yourself the scene, not hear it described.
Sort every direction into four piles
Before your first run, go through your scenes with a pencil and give each direction a letter. It doesn’t take long, and it settles most “do I say this?” questions in advance.
- Skip (S). Directions that only describe: the set, what a character looks like, the weather, how the writer imagines the room. Cross them out lightly. You’ve read them once; that’s enough.
- Do (D). Your own physical business: you sit, you pour, you pick up the phone, you exit. Circle these. You’ll rehearse them as actions, not words.
- Hold (H). Pauses, silences, and beats. Draw a slash. You won’t say “pause”; you’ll take the time.
- Cue (C). Anything that isn’t a spoken line but triggers your next line or action: a door slam, a phone ringing, the other character slapping you, a look. Box these. Your partner will signal them.
Some directions land in two piles. “She slams the door” is business for her and a cue for you. Mark it from your point of view. If it’s your action, it’s a D. If it’s the thing you answer, it’s a C.
See it on a real scene
Here’s the opening of Oscar Wilde’s The Importance of Being Earnest, from the public-domain Standard Ebooks text. Say you’re playing Algernon.
Morning-room in Algernon’s flat in Half-Moon Street. The room is luxuriously and artistically furnished. The sound of a piano is heard in the adjoining room.
Lane is arranging afternoon tea on the table, and after the music has ceased, Algernon enters.
ALGERNON. Did you hear what I was playing, Lane?
LANE. I didn’t think it polite to listen, sir.
[…]
ALGERNON. And, speaking of the science of Life, have you got the cucumber sandwiches cut for Lady Bracknell?
LANE. Yes, sir. Hands them on a salver.
ALGERNON. Inspects them, takes two, and sits down on the sofa. Oh! … by the way, Lane, I see from your book that on Thursday night, when Lord Shoreman and Mr. Worthing were dining with me, eight bottles of champagne are entered as having been consumed.
LANE. Yes, sir; eight bottles and a pint.
The excerpt skips two short speeches where the […] is; otherwise the words and directions are as in that edition. Here’s how Algernon would mark them:
- The set description is an S. Read it once and picture the room.
- The next paragraph has a C and a D for you: the music stops (C), and you enter (D). Rehearse walking in and saying your first line, not reading about it.
- Hands them on a salver is a C. Lane’s “Yes, sir” ends, but it’s the plate reaching you that cues your business, which leads into your next line, so your partner should hold out a hand or a book as the plate.
- Inspects them, takes two, and sits down on the sofa is a D, and it’s also hidden timing. Your “Oh!” comes after you’ve sat, so in rehearsal you take two imaginary sandwiches and sit before you speak.
Read aloud, that whole exchange sounds like a narrator interrupting a butler. Run with the directions done instead of said, it becomes a scene: a man helping himself to the sandwiches while setting a trap.
What to do with pauses, beats, and parentheticals
Pauses are easy to say out loud by mistake, because they’re short and sit right in the middle of a speech. Never say them. Take them. If a line has “(pause)” in the middle, stop for a real breath and let something happen in your head before the second half.
A screenplay’s parenthetical is the little instruction in brackets under the character name. Ken Miyamoto’s Final Draft post on parentheticals defines one as “a short instruction or cue” placed between a character’s name and dialogue, and he calls “beat” a “non-specific” label. That’s useful to an actor. A “(beat)” doesn’t tell you what to play; it tells you something shifts here. Your job is to decide what: a thought lands, a tactic changes, you hear what they really meant.
Mark parentheticals by type:
- Technical ones, like (V.O.), (O.S.), (CONT’D), or (into phone), are never spoken and rarely matter in a run. Treat them as an S, or as a D if you need to hold a phone.
- Pause ones, like (beat) or (pause), are an H: take the time, never say the word.
- Tone ones, like (wryly) or (angry), are the writer’s hint. Try them, but don’t let your partner read them aloud before every line. Acting Magazine’s article says you can interpret directions in a way that suits your performance.
- Action ones, like (sitting) or (handing her the keys), are a D or a C, the same as stage directions.
If pauses are where you keep losing the thread, our guide to pauses in acting goes deeper on when a silence works and when it just looks like you forgot.
Do you memorize stage directions?
Not as words. Nobody will check whether you can recite “inspects them, takes two.” But you should know your D and C directions cold, as things you do and things you answer, and the best way to learn them is to do them while you say the lines.
That’s not just tidy advice. The researchers Helga and Tony Noice, a cognitive psychologist and an actor-researcher, spent years studying how actors learn. The APS Observer’s summary of their research describes a study in which lines learned while making an appropriate motion, like walking across a stage, were remembered better later. The motion didn’t even need to be repeated when the actors recalled the lines.
So stand up for your runs as soon as you can. Sit where the script says you sit. Pick up a pen where it says you pick up the letter. The action becomes a hook for the line that goes with it. And once rehearsals start, your director’s blocking usually replaces the printed directions; write it in pencil next to them, and learn the blocking the same way. Our guide on how to memorize blocking has a full method.
Brief your partner in one minute
Most of the trouble with stage directions comes from a partner who was never told what to do with them. They’re being helpful by reading everything. Give them this brief before you start:
- “Read only the dialogue. Skip anything in italics or brackets.”
- “When you see a box, give me the cue in one word or a gesture: say ‘door’ or clap for the slam, hold out your hand for the plate.”
- “When you see a slash in your lines, wait about a breath. The slashes in mine are for me.”
- “Read the other characters plainly. You don’t need to act.”
- “If I go up, wait a moment, then give me the first couple of words, not the whole line.”
Our guide on how to run lines with someone has more on picking a partner and handling mistakes without stopping the run.
If nobody’s free, Offbook does the partner’s job: realistic voices read every other part and wait for your line before they play the next cue. In the scene editor, you can edit the stage directions and add custom pauses, so a long silence in the script becomes a real gap before your cue, as the video below shows.
Self-tapes and readers: leave them out
On tape, the answer is clearer. Acting Magazine puts it bluntly: “Generally, the answer is no.” Casting already knows the script; they want to see the direction played, not hear it. The same article notes that casting occasionally asks for directions to be included, so read the instructions that came with your sides and follow them.
Your reader should skip them too. Cross out the directions on their copy so they don’t have to decide on the spot, and mark any cue they need to give with a word or a nod. Our guide on being a good self-tape reader is worth sending them.
What about actions you can’t do in a small frame, like running down a hallway or throwing a chair? The Acting Magazine piece suggests adapting the movement to your space, or suggesting the action rather than doing it fully, and keeping the feeling behind it in your face and voice. A shift in your posture can do the work of a cross.
When someone should read them
There are times when directions belong out loud. At a table read, someone often voices them so the room can picture the action. Theatrefolk’s guide for directors on running an effective table read notes that stage managers often read the stage directions aloud, to help the team visualize the physical action. That’s their job, not yours. Our guide on how to prepare for a table read covers what you do meanwhile.
The other time is your very first read alone. Read every word once, directions included, slowly, so you know what happens and where. After that, the directions have done their job as text. From the second run on, they live in your body and your pencil marks, not your mouth.
A quick routine for a new scene
- Read the scene once, everything included, to know what happens.
- Mark every direction S, D, H, or C from your character’s point of view.
- Run the dialogue seated, skipping the S directions and taking the H pauses.
- Stand up and run it again, doing your D business with stand-in props.
- Give your partner the one-minute brief, and run it with them signaling the C cues.
- Once you have blocking, pencil it next to the printed directions and keep rehearsing it with the lines.
Common questions
Do you read stage directions out loud when running lines?
Usually not. Say only the dialogue, and turn the directions into things you do (your business), time you take (pauses), and cues your partner signals with a word or gesture. Read everything, directions included, once at the start so you know what happens, and let a stage manager read them at a table read.
What do you do with (beat) and (pause) when learning lines?
Never say them; take them. Mark each one with a slash and stop for a real moment there. A beat usually means something shifts, so decide what: a thought lands, your tactic changes, or you hear what the other person meant. That gives the pause something to do.
Should my line partner read the parentheticals?
No. Ask them to read only the dialogue. Technical parentheticals like (V.O.) or (CONT’D) don’t matter in a run, and tone ones like (wryly) are hints for you, not something to hear before every line. Mark any action that cues your line, and have your partner signal it with one word or a gesture.
Do you memorize stage directions?
Not word for word. Learn your own business and your cues as actions, by doing them while you say the lines. Once rehearsals start, your director’s blocking usually takes over from the printed directions, so pencil it in and rehearse it with the text.
Free tool · No account needed
Try it: turn your lines into first letters
Paste a speech or a few lines. Each word shrinks to its first letter, so you have to recall the rest. Tap a line to check it.
Do this with AI voices reading the other parts
In Offbook, your lines can show as first letters while realistic voices read every other character and wait for your line.
Keep reading
- Props in a Self-Tape: What to Use, What to Mime, and What to SkipA simple test for every prop in your sides: keep the few the scene can’t work without, mime or swap the rest, and leave weapons, food, and set dressing out. What the UK Self-Tape Code of Practice and Spotlight say, how to keep a prop in a mid-close shot, and how to rehearse the business with your lines.
- What to Do When Your Scene Partner Forgets a LineHow to tell a pause from a blank, feed a cue without the audience noticing, follow a partner who skips a page without losing the story, and what to say (and never say) once the scene is over.
- What to Rehearse the Night Before a Show (and What to Leave Alone)Running the whole play again at midnight feels responsible and mostly feeds your nerves. What memory research and stage practice say to run the night before opening (your hardest passages, your cues, the first line of every scene), when to stop, and how to use the morning and the hours before half hour.
- How to Self-Tape a Scene With Few or No LinesThe sides are three pages long and your character says four words, or nothing at all. How to find what a silent character wants, give every reader line a thought to land on, brief your reader so the scene has a pulse, keep your reactions the right size for the frame, and start and end the tape so the listening shows.