How to Self-Tape With Your Phone: The Settings That Matter
The phone part of a self-tape, setting by setting: landscape at eye level, HD instead of 4K, 24, 25, or 30 frames per second, HDR off, focus and exposure locked, and a file small enough to upload. The casting rules come from Spotlight and Eco Cast, with the exact menus on iPhone, Pixel, and Galaxy.
The Offbook team
Nov 10, 2026 · 9 min read
The phone you carry around is a good enough camera for a self-tape. The trouble is that it was set up for something else: vacation clips and group photos, held upright, often in HDR, with a camera that keeps re-judging focus and brightness on its own.
None of that helps an audition. A tape that’s sideways, too big to upload, or shifting in brightness every time you lean in can lose casting’s attention before your first line lands.
The short version: turn the phone sideways and put it at your eye level. Film in HD, not 4K, at 24, 25, or 30 frames per second. Turn HDR off. Lock focus and exposure on your face before you press record. Then send a file small enough for the platform you’re uploading to. Most of those rules come from Spotlight and Eco Cast, and every menu below comes from the phone maker’s own help pages. When the request gives different instructions, follow the instructions in the breakdown.
This guide is only the phone. For light, sound, and the wall behind you, see our budget self-tape setup. For the whole process from sides to send, see how to self-tape an audition.
Turn it sideways and put it at eye level
Spotlight is clear on landscape. Spotlight’s guide to self-taping says to film in landscape, not portrait. Its tips for young performers go further: film the whole tape in landscape, even the ident, because plenty of people still have great difficulty working with portrait video. A tall tape makes extra work for someone down the line.
Height comes next. Spotlight says the camera should be at your eye level, with you framed in a mid-close shot, from your chest to the top of your head, unless the request asks for something else. A phone lying on a desk looks up your nose. A phone held by a friend standing over you looks down on you. Neither is the shot casting asked for.
You don’t need a tripod to get there, only something steady at the right height. A phone clamp on a stand, a shelf, or a stack of books on a chair all work. What matters is that the phone doesn’t move between takes, so every scene is framed the same way.
Two small settings help you get it level. On an iPhone, Apple’s camera tools guide shows how to turn on Grid and Level in Settings > Camera. Samsung lists a Grid lines option in the Galaxy camera settings. A tilted horizon is a small thing, but it’s the kind of small thing a straight line on the screen fixes in two seconds.
Spotlight also says your eyeline should be close to the camera, so casting can see both sides of your face. That’s why Eco Cast’s recording guide puts your reader behind the camera or directly next to it, not across the room. If the screen faces you, don’t look at yourself on it during the take. Watch your reader.
Resolution: HD is plenty, and 4K costs you
Most phones now offer 4K, and it’s tempting to use the best setting you have. For a self-tape, don’t. Spotlight’s tips say to film in HD as opposed to 4K, because the tape is not going to be watched in 4K, and the extra resolution only makes the file much larger. Its editing and sharing guide says 720p is more than sufficient.
File size is the real cost. Apple’s own guide to recording video on iPhone puts it in one line: “Faster frame rates and higher resolutions result in larger video files.” Bigger files take longer to upload, and some platforms set hard limits. Breakdown Services’ Eco Cast help page says each video clip can be no larger than 100 MB.
So set HD before you film, not after. If the request names a resolution, use that one. Where to find the switch:
- iPhone: in the Camera app’s Video mode, tap the resolution and frame-rate values at the top of the screen and pick HD. More formats, and the default, are in Settings > Camera > Record Video.
- Pixel: in Video mode, tap Video Settings at the bottom left, then choose a resolution under “Resolution.” Google’s Pixel Camera help suggests Full HD to save storage space.
- Galaxy: Samsung’s camera settings guide lists video recording options in the camera’s settings, including a Reduce file size option under Advanced video options. Menus vary by model, so check your phone’s own settings screen.
Frame rate: 24, 25, or 30, never 60
Frame rate is how many pictures per second the phone records. Spotlight’s advice is to film at 24, 25, or 30 frames per second, as opposed to 60, because 60 makes the file considerably larger than it needs to be. On a phone, Spotlight notes, resolution and frame rate are both changed in the camera settings menu.
Spotlight adds one regional detail: if you can, film at 25 fps in the UK, because it matches the frequency of the electrical system there and prevents image problems with certain lights. Apple’s guide lists 25 fps, along with the PAL formats used in many countries, as options on models that support them. If you tape for a market that’s new to you and the breakdown names a frame rate, use it.
Two automatic features may change your frame rate for you. On an iPhone, Auto FPS can drop to 24 fps in low light to improve the picture, according to Apple’s video recording settings guide. Twenty-four is inside Spotlight’s range, so you don’t need to fight it. Galaxy phones have their own Auto FPS setting, which Samsung says optimizes the frame rate for brighter low-light video. Either way, the rate you choose is the one to check: just don’t pick 60.
Whatever rate you pick, use the same one for every scene of the same tape, so the clips match when casting watches them one after another.
Turn off HDR before you film
HDR video is the setting most actors never knew they had on. On supported models, Apple says, the iPhone records video in HDR, and Google describes HDR video on Pixel as giving you vibrant color. The trouble starts on other screens. Spotlight’s support page on video files suggests that if you film on an iPhone, you turn HDR off in the camera settings before filming, because HDR can distort the color balance.
Apple’s guide explains part of why: an iPhone shares HDR video with Apple devices that support it, and other devices receive an SDR version of the same video. You can’t be sure which version a casting office ends up watching. Filming in SDR from the start means everyone sees the same thing you saw.
- iPhone: Settings > Camera > Record Video, then turn off HDR Video.
- Pixel: the 10-bit HDR video setting is in Video Settings, at the bottom left in Video mode, on Pixel 7 and later, according to Google’s guide to recording video on Pixel.
- Galaxy: HDR10+ videos is listed under Advanced video options in the camera settings.
Spotlight’s note names the iPhone. Pixel and Galaxy HDR switches aren’t covered by it, but the reasoning is the same, so we’d film with them off too unless the request says otherwise. If you’ve already filmed a great take in HDR, Spotlight says it can be converted to SDR afterward, so you don’t need to throw it away.
Lock focus and exposure on your face
A phone camera is always guessing. Apple’s camera tools guide says the iPhone sets focus and exposure automatically, with face detection balancing exposure. That’s great for a birthday party. In a self-tape, it means the picture can brighten or darken when you lean in, turn your head, or raise a hand, and the focus can hunt for the wall behind you.
The fix is to lock both. On an iPhone, tap your face on the screen to set the focus there, drag the exposure control beside it up or down to adjust brightness, then touch and hold until you see AE/AF Lock. Tap the screen again to unlock it. Apple describes this in its photo section, so in Video mode, check that the AE/AF Lock label appears before you press record. Since you can’t tap your own face while you stand on your mark, have your reader tap where your face will be while you stand on your mark, then check the framing in a short test take.
Settings that keep the picture still
A few more iPhone settings, all in Settings > Camera > Record Video, are worth knowing for a tape on a stand:
- Lock White Balance locks the color balance while you record. Apple says it improves accurate color capture.
- Lock Camera stops the phone from switching between its cameras while recording. It’s off by default.
- Enhanced Stabilization zooms in slightly to steady the picture, and it’s on by default. On a fixed stand you’re not moving, so frame your shot with the setting as it is, then don’t change it between takes.
On a Pixel, the Stabilization menu in Video Settings has a Locked option that Google describes as for capturing still shots. On a Galaxy, Pro video mode lets you set the exposure value and white balance by hand, and Tracking auto-focus keeps a moving subject in focus if the scene has you moving around. Neither Spotlight nor Eco Cast says anything about stabilization or focus modes, so treat these as tools, not rules. The test is simple: does your face stay sharp and evenly bright for the whole take?
Send a file that opens the first time
The good news first: Spotlight’s editing guide says a self-tape filmed on your phone will already be in the correct format. The files that need converting are MOV or AVCHD files from other cameras, which Spotlight says to turn into an MP4 or M4V. Its support page says phone recordings are usually compatible.
Size is where phone tapes go wrong. Spotlight says to avoid sending files over a gigabyte, and Eco Cast caps each clip at 100 MB. HD at 30 fps or below gives you a much smaller file than 4K at 60, since Apple notes that higher resolutions and frame rates mean larger files. Still check the size of each clip against the limit before you upload. Spotlight also says not to send a video as an email attachment; its tips explain that a phone may compress an attached video, cutting its quality.
If a platform won’t accept your iPhone file, Apple’s support page on HEIF and HEVC media offers two fixes. Before filming, Settings > Camera > Formats > Most Compatible makes new videos use H.264, the older format that Apple calls more broadly compatible. After filming, QuickTime Player on a Mac can export the video as Greater Compatibility (H.264).
One more thing to know before you upload. Eco Cast says that once you’ve submitted, there’s no chance to make changes, so watch the whole file back first. Our guide to naming, exporting, and sending a self-tape covers file names, transfer links, and the last checks.
A five-minute phone check before every tape
Settings change without you noticing. You filmed a 4K clip at the weekend and forgot to switch back, or a friend borrowed the phone. Run this list before the first take, every time:
- Phone in landscape, at your eye level, on something that won’t move.
- Framing from your chest to the top of your head, unless the request asks for more.
- Resolution set to HD (720p or 1080p), or what the breakdown asks for.
- Frame rate at 24, 25, or 30. Not 60.
- HDR video off.
- Focus and exposure locked on your face, with the lock label showing.
- Do Not Disturb on, and enough storage free for several takes.
- A ten-second test take, watched back on a computer, not just the phone.
That last step is the one people skip. A laptop screen can show a soft focus or a color shift that looked fine on the phone.
The setting no phone has: knowing the sides
All of this is about getting the picture out of the way so casting watches you. The quickest way to waste a perfect setup is a take where your eyes keep dropping to the page.
Offbook is built for that part. Upload the sides, pick your role, and realistic voices read every other character while Offbook listens and plays the next cue when you finish your line. Hide your lines, or switch them to first-letter cues, until you can run the scene with the page blank. Then the take is about the scene, not the words.
For a quick start with no account, our free line memorizer turns your lines into first-letter cues.
Questions actors ask
How close should the phone be to me?
Closer than most people set it. Spotlight’s self-tape guide says to sit close to the phone for the best sound, since the phone’s own microphone is picking you up. A chest-to-head frame at eye level usually puts it near enough. If the breakdown asks for a wider shot, check the sound on your test take.
Should I share the file by WeTransfer, Vimeo, or Google Drive?
Use whatever the request names. When it names nothing, Spotlight’s editing guide says to use WeTransfer, to make Vimeo files downloadable, and to avoid Google Drive unless you’re told to use it.
Should I use the front or back camera?
Neither Spotlight nor Eco Cast says, so follow the instructions in the breakdown. In practice, the front camera lets you check your framing while you tape, and the back one means setting up with a test take. Whichever you use, check the resolution, frame rate, and HDR settings for that mode, and keep the same camera for every scene.
Can I rehearse the sides on my phone too?
With Offbook, rehearse on your laptop with the full script on a big screen, and listen to your scenes on your phone anywhere. That way the phone stays free for the camera when it’s time to tape.
Can I edit and send the tape from my phone?
Often, yes, if the platform works on your phone and the file meets the request. Spotlight says phone files are usually in the right format already. Just don’t attach the video to an email.
Free tool · No account needed
Try it: run a scene right here
Pick a classic scene and a part. The voices read the other lines, and the scene waits for yours. No account needed.
Do this with your own script
Upload a PDF or a photo of your script, and AI voices read every other part and wait for your line.
Keep reading
- How to Name, Export, and Send a Self-TapeThe last mile of a self-tape: how to name the files so casting can find you, which export settings to use, how big the file should be, how to send it by upload or link, and the checks that stop a good take from arriving broken, late, or unwatchable.
- How to Do a Live Zoom Audition: Setup, Eyeline, and Reading With CastingA live Zoom audition is not a self-tape. Where to look when your reader is a small window, phone or laptop, what lag does to quick cues and how to play through it, how to take a note live, and why knowing the lines matters more on a screen.
- Self-Tape Framing: How Close, How Much Headroom, and When to Go WideThe default self-tape frame is chest to just above the head, in landscape, but the request always wins. Here’s how to read the instructions, how much headroom to leave, where your eyes should sit, when to go waist up or full body, and a two-minute check that catches framing mistakes before you record the take.
- How Many Takes Should You Send in a Self-Tape?What casting and agents actually say about one take versus two or three, how to make a second take different enough to be worth sending, how to pick your best take, and when to stop filming.